Managing Accounts6.5
How to Display and Change the 'Account Mode'
To display and change the 'Account mode':
1. From the home screen:
Press and select the path: Account Management
The Login screen is displayed.
Enter the Supervisor PIN code and press [OK].
2. Select Account Mode Selection.
The Account Mode Selection screen is displayed with the current 'Account Mode'
shown.
3. Select the desired 'Account mode'.
4. Press [OK] to confirm.
5. If required, enter the PIN code and press [OK].
The Mailing System then confirms that the 'Account Mode' has been changed.
127
| Page 127 | | Jun-21-2021 09:24 |
6
Accounts and Access Control
To Next Page
Loading...
