quadient IX-3 - Selecting the Correct Imprint Type

Choosing Imprint Type3.2
Type of Process and Type of Imprint
The table below indicates the 'Type of imprint' to choose, depending on the type of
process you want to apply to each set of mail.
The column on the right indicates, for each Type of imprint, the options available for
each type of imprint.
If you do not set any parameter, the mailing system uses default values.
Available imprint optionsType of imprintType of process
• Rate
• Weight
• Date
• ERA Slogans (optional)
• Slogan (optional)
• Print offset (optional)
[Normal]
(Printing [Normal]
Mail on page 36)
Applying postage to outgoing
mail
• Pre-paid imprint
• Slogan (optional)
• ERA Slogans (optional)
• Print offset (optional)
• Weight
[PPI]
(Printing [PPI] Mail
on page 50)
Sending Prepaid mail
• Date received (ON or OFF)
• Slogan 'Received' (ON or
OFF)
• Slogan (optional)
• Print Counter (optional)
• Print offset (optional)
[Received]
(Printing Incoming
Mail with [Received]
Mode on page 45)
Printing 'Received' or the date
on incoming mail
• Amount
• Date (optional)
[Payment
Surcharge Entry]
(Printing [Payment
Surcharge Entry]
Mail on page 54)
Enter the postage amount
manually
• Counter reset[Pass Through]
(Printing [Pass
Through] Mail on
page 48)
Counting
33
| Page 33 | | Jun-21-2021 09:24 |
3
Processing Mail