How to Process [PPI] Mail
In Standard weighing type ( ).
From the [PPI] home screen, to print postage directly on mail pieces:
1. Put the mail piece on the Weighing Platform.
The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.
2.
Remove the mail piece from the Weighing Platform. Press . The system motors
start running.
3. Insert the envelope into the mail path against the rear-guide wall, with the side
to be printed facing upwards.
If you want to seal the envelope, first engage the flap into the
moistener (option). Do not try to moisten self-adhesive envelopes.
4. The Mailing System prints postage and the mail piece is ejected.
In Manual weight entry type ( ).
From the [PPI] home screen, to print postage on mail pieces:
1.
Press . System motors start running.
3
Processing Mail
51
| Page 51 | Jun-21-2021 09:24 |