4. Insert the USB memory key into the USB port of the base (at rear left) and press
[OK].
5. Follow the instructions displayed on the screen.
At the end of the process, a message will inform you that you when you may
remove the USB memory key.
Account summary
• The number of accounts you can create is set to 30 by
default and can be increased to 100 if required.
• To upgrade your system, please contact your Customer
Service.
• Account names must be unique within the system.
136
| Page 136 | Jun-21-2021 09:24 |
6
Accounts and Access Control
To Next Page
Loading...
