System first start-up BES X Installation Manual, Rev.9, Jun 2018
124
124 P/N: 400288005
11. Click on the “Lanes selected” box.
12. In the screen that appears select all the lanes that have to be reinitialized.
13. Click on the “OK” button.
14. On the “Upload to Lanes” screen click on the “Reinitialize” button.
15. Click on the “Yes” button on the Warning message that appears.
16. Click on “Yes” on the confirmation message that appears.
17. The Reinitialize procedure will now start. NOTE: This procedure will take more than an hour to
finish. DO NOT switch off the BES X system during the Reinitialization process.
18. Now the ODD overhead monitor will turn off (or will display a black screen, or will display the
message “no signal”, depending on the model of the monitor) while the monitor on the EVEN lane
will display different text rows. The last text row on the even lane monitor will be “system halted”.
To Next Page
Loading...