Rational SCC Line User Manual

-40-
S
S
C
C
1
2
3
4
1
2
3
4
delete
Prog
new
level
control
copy
change
Clean manual
CleanJet
select program name with central dial
give program name (blank - between _ and @
existing SCC process or program can be
copied and get an index number, i.e. 1; name
can be edited and changed;
Change parameter and / or cooking mode of
program in a non-active program;
confi rm change by:
selected program fl ashes; confi rm delete by
pressing again
1. Give program name
2. Store
3. select mode, temperature, time (in minutes and
seconds) or core temperature,
4. Second program with identical mode and
temperature, but different time can be stored
and selected alternating after pre-heating;
rinse with water only; cabinet will be dried out;
rinse with 1 rinse tab for cleaning after steaming
rinse with 1 cleaner tab for cleaning in between
cooking cycles; no drying of cabinet;
Cleaning of light soiling with drying of cabinet
Cleaning of medium soiling with drying of cabi-
net
Cleaning of strong soiling with drying of cabinet
Note:
Reduce number of detergent tabs when
too much foam is visible;
Check direction of water jet inside cabinet
when timer is counting up;
new
copy
change
delete
level
control
rinse
without tabs
rinse
interim
cleaning
light
medium
strong
CleanJet
rinse
without tabs
rinse
interim
cleaning
light
medium
strong

Rational SCC Line Specifications

General

Brand	Rational
Model	SCC Line
Category	Grill
Language	English