Raven DirecSteer - Guidance Mode; Guidance Partner

System Settings
3. Select the Guidance Setup Menu button.
Review the following sections for assistance with selecting the appropriate guidance
options for your application.
Guidance Partner
Use the drop-down list to select the desired guidance partner.
Guidance Mode
Select one of the following modes for guidance operations:
l
GPS - Guidance is performed via GNSSguidance points only.
l
Vision - Guidance is performed via the VSN® camera only. GNSScorrections are
neither utilized for guidance nor available as a fall-back solution. Line acquire must be
performed manually. When the solution quality falls below the minimum threshold, the
steering system will disengage.
l
Vision+ - Guidance is performed via a combination of GNSSand the VSN® camera.
This mode may be utilized for line acquire via GNSSwith the system switching to the
VSN® camera when the machine is aligned and near the guidance line. This mode will
also fall back to GNSSguidance if the solution quality falls below the minimum
threshold. The system will then return to VSN® guidance automatically when the solu-
tion quality is above the minimum threshold.
87