Raven DirecSteer - Performance Monitor; Online Performance

Chapter7
Code ID Description Recommended Actions
3. If the machine steering valve offers LEDstatus
lights, review the machine operator manual for
additional troubleshooting procedures.
523908 .31
No SGC (steer-
ing guidance
controller) detec-
ted.
The steering control unit (SCU) does not detect a
navigation controller on the CANbus.
1. Ensure cable connections are properly seated.
2. Inspect for damage to cables or cable con-
nections including bent or pushed in pins.
3. Check CANbus communication.
523916 .13
SGC (steering
guidance con-
troller) software
compatibility.
The current steering guidance controller (SGC)
software is out of date. Update the SGC and
HDUsoftware.
583879 .0
Logic LDO (lin-
ear and low drop
out) power error.
The logic power supplied to the ECU is out of range. If
the error persists, contact your local Raven dealer or
the Raven Technical Service team.
Performance Monitor
The steering guidance controller (SGC) offers auto-steering performance metrics.
1.
From the auto-steer Home page, select the Performance button.
2. Each Performance page offers system metrics. These pages allow the operator to reset
data collection for diagnostic purposes or to collect metrics for a specific period of
time.
Online Performance
The Online Performance page provides average and 95% metrics for auto-steer system
performance.
172