External Device Settings
The following sections offer information on setting up external devices or displays to utilize
GNSS messages from the auto-steer system.
Viper® 4 and Viper® 4+
To configure Viper® 4 or Viper® 4+ to use GNSS messages from the auto-steer system:
Note: If RS1™ is replacing a steering system, the old steering ECU must be unplugged and a
Serial Redetection performed before continuing. Refer to the Serial Device Detection topic for
assistance.
1. From the ROS home screen, select the Edit Machine icon.
45
Chapter 4:
External Device Settings
To Next Page
Loading...
