Raven DirecSteer - Modem Status; Modem Type

Chapter6
Modem Status
The modem status may display as:
l
No Comm: No modem detected.
l
Configuring: Modem is detected.
l
Connected: Modem is connected to the steering guidance controller (SGC).
Modem Type
The detected radio modem type will display here. Modem type options are:
l
450 MHz
l
900 MHz
Radio Base
Select a base station from the drop-down list to select a stored radio base or select New to
create a new radio base. Refer to Add or Delete Radio Modem for assistance with managing
or creating radio modems.
RTKOut
Select RTKOut to output 3D compensated RTK to another ECU. The operator may set the
baud rate for the serial output.
108