Raven DirecSteer - Informational Readouts; Current Voltage; Status; Operator Presence Sensor Type

System Settings
3. Select the Operator Presence Sensor button.
Informational Readouts
The Operator Sensor Type Selection page displays the following information:
Current Voltage
Displays the current switch voltage. This display may be useful to adjust the upper and lower
voltage limits if necessary.
Status
Displays the operator presence switch status. Toggle the presence switch (e.g. stand or sit in
the operator seat) and confirm that the status indicates the switch is on when the operator is
seated.
If the status does not change, but the current voltage changes, adjust the upper and lower
limit settings as necessary.
Note: Review "Diagnostics and Troubleshooting" on page145 for information on the status
displayed in this area.
Operator Presence Sensor Type
Use the drop-down list to select the type of switch used to detect the presence of the
operator while the auto-steer system is engaged.
97