Raven DirecSteer - Perform a Calibration

Chapter6
l
The machine measurements are correctly entered into the UT or field computer.
l
The machine hydraulic fluid is at the normal operating temperature.
NOTICE
Calibration of the machine steering system should be performed
in a field or other large, open space and with conditions similar to
normal vehicle operation.
If the ground or surface is slippery, muddy, or freshly tilled, the
auto-steering system may learn incorrect steering responses for
normal operating conditions.
Ensure the machine hydraulics are operating properly and there
are no other mechanical issues which may affect performance of
the steering system.
Perform a Calibration
Note: Some pages and options may differ based upon how the machine or implement is
configured.
1. Park the machine on a level surface with several acres of smooth ground available.
2.
From the auto-steer Home page, select the Tools button.
84