Operation
Resume Switch
The status of the enable switch used to engage the steering system.
The resume switch is set in the OFF position.
The resume switch is set in the ON position.
Disengage Sensor
Status of the pressure used to disable steering when the steering wheel is turned.
The steering disengage sensor is active. The steering system cannot be enabled.
The steering disengage sensor is out of range or disconnected.
The steering disengage sensor is inactive. The steering system can be enabled.
Wheel Angle Sensor
Displays the status of the position sensor.
The wheel angle sensor (WAS) is out of range or disconnected.
Wheel angle sensor (WAS) is not calibrated.
57
To Next Page
Loading...
