Raven DirecSteer - Roll, Pitch, Yaw Rate, and Heading; Calibrate Terrain Compensation; GPS Serial Output

Chapter6
2.
Select the GPS Setup tab.
3. Select the Terrain Compensation Setup button. The following terrain compensation
diagnostic information is displayed.
4. When finished reviewing the displays, or after completing a calibration, select the
Accept button in the lower, right corner of the page to return to the GPSSetup tab.
Roll, Pitch, Yaw Rate, and Heading
Real-time measurement data used by the 3D terrain compensation feature.
Calibrate Terrain Compensation
Begins the terrain compensation process. Review the "Terrain Compensation Calibration" on
page29 procedure for assistance with completing the terrain compensation calibration
process.
Note: Calibration of the terrain compensation system should be performed in a field or
other large, open space.
GPS Serial Output
Note: Some pages and options may differ based upon how the machine or implement is
configured.
104