Raven DirecSteer - Automation Level; Guidance Path Partner; Wheel Angle and Implement Position Sensor Settings

Chapter6
Automation Level
Set the mode for devices installed in an OMNiDRIVE™ or OMNiPOWER™ system:
l
GPS Only - Stream GNSS correction information only. Select this option for guidance
only applications or to stream corrections to a separate automated steering system.
l
Steering Only - Use the guidance and auto-steering features of the device. Select this
option for automated tractor or sprayer steering applications.
l
Autonomy Driverless - Select this option to enable features for autonomous systems
such as OMNiDRIVE™.
Note: DirecSteer does not support Autonomous operations.
Guidance Path Partner
Displays the recognized device which provides a guidance path for the automated steering
system.
Wheel Angle and Implement Position Sensor Settings
Note: Some pages and options may differ based upon how the machine or implement is
configured.
1.
From the auto-steer Home page, select the Tools button.
88