Raven DirecSteer - Base Station Name; RTK Source Toggle Option; Baud; Network

Slingshot® Universal Terminal Overview
Base Station Name
The ID of the base station from which RTK corrections are received.
RTK Source Toggle Option
Note: Generally, the RTK Source should be set to “Auto.” However, this setting may be
locked to a “Serial” setting if RTK corrections are provided via a non-Raven source or
Slingshot®Field Hub connected serially. This setting may be set based upon location or
customer.
Network
Select if the source is provided via the Slingshot® server, either through Ethernet or cellular
receiver.
Serial
Select if the source is provided via serial input to the RS1™ unit.
None
Use this setting to turn off a source if there are multiple RTK over CAN devices on the
system.
Baud
Use the drop-down option to set the baud rate for correction information from the base
station.
135