Machine Calibration
Auto-Steer Calibration
Roadway Homologation Terms
1. If prompted to review and accept roadway homologation terms, review the on-screen
text and toggle the check-box option.
Note: Some machine tunesets and operational regions may require that the operator
accept the roadway homologation terms. Refer to "Certification and Compliance" on
page203 for additional details and certification information.
2. Select the Next page button to proceed.
3. When the homologation terms check box is enabled on the previous page, the
Operator Sensor Type Selection page is displayed.
4. Use the Sensor Type drop-down to select the type of operator presence sensor
connected to the auto-steer system.
33
To Next Page
Loading...
