Raven DirecSteer - Disengage Status; Disengage Type; Informational Readouts

Chapter6
3. Select the Steering Disengage Settings button.
Informational Readouts
The Disengage Settings, Disengage Engage Settings, or Implement Engage Setup page
displays the following information:
Disengage Type
Displays the type of disengage switch used in the auto-steer system.
l
Encoder
Disengage Status
Indicates the status of the disengage switch. The following statuses may be displayed:
l
Green - The disengage switch is detected and the steering wheel is not moving. The
auto-steer system may be engaged when this status is displayed.
l
Red - The disengage switch is detected and the steering wheel is moving. The auto-
steer system may not be engaged when this status is displayed.
l
Yellow - No disengage switch is detected in the system. Turn the steering wheel to
activate the disengage switch. If the disengage switch is not activated, check cabling
for loose or missing connections.
Note: DirecSteer does not support testing the disengage sensor from the Disengage Settings
page.
92