Raven DirecSteer - Page 173

Diagnostics and Troubleshooting
Code ID Description Recommended Actions
resource.
523861 .31
GPSreceiver
error:auxiliary 3
event.
523862 .31
GPSreceiver
error:auxiliary 2
event.
523863 .31
GPSreceiver
error:auxiliary 1
event.
523864 .31
GPSsource mis-
match
Machine and implement steering systems are using
different correction types. Ensure that both the
machine and the implement are configured for the
same correction type.
523868 .31
G-force limit act-
ive.
The maximum G-force has been reached during line
acquire or curvature steering operation. Contact the
Raven Technical Service team for additional
assistance.
523874 .13
Memory com-
munication error.
1. Cycle power to the machine.
2. If the error persists, contact your local Raven
dealer or the Raven Technical Service team.
523875 .13
SCUsoftware out
of date.
Update the steering guidance controller (SGC) or steer-
ing controller unit (SCU) software.
523898 .31
OEMengage
error.
Field computer on-screen engage switch not sup-
ported. Use the machine engage switch to initiate
auto-steer.
523913 .31
GPSinvalid
authorization.
Some correction types require an unlock code. Either
the code was not entered correctly or an existing code
has expired.
Review "Feature Unlocks Tab" on page59 for
information on entering unlock codes. Contact a local
Raven dealer for additional assistance with feature
unlock codes and activation.
159