Chapter 4
58 Viper Pro Installation & Operation Manual
Product Rates Area
The current target (R
T
) and actual (R
A
) application rate is displayed for each product node or control channel in
the product rates area.
Note: When the field computer is configured for the ‘Manual’ application type, touch the application area
to toggle logging the coverage area on or off during a job.
Boom Status Display
The ‘Booms’ area displays the status of each section currently configured on the Viper Pro field computer.
The status indicator or display character for each section displays green if the section is on or active. If a
section is toggled off, the status indicator for the corresponding section will display gray.
Note: If an optional AccuBoom, automatic boom section control, system is installed with the Viper Pro,
sections currently controlled by the AccuBoom feature will display with a blue background.
Touch within the Booms area accesses the AccuBoom Control Setup screen. If the required hardware has
been installed, the Viper Pro can be used to automatically control boom sections based on the coverage map
or other scouting information such as a field boundary. See Chapter 9, Using AccuBoom™, for a detailed
description of the AccuBoom feature.
To Next Page
Loading...
