Raymarine E-Series - Page 176

4. Select the SELECT VIEW softkey.
5. Select the A-SCOPE option.
Note: Enabling A-Scope mode automatically switches OFF
Bottom Lock and Zoom.
Bottom Lock
The Bottom Lock function applies a lter to atten the image of the
seabed and make any objects on or just above it easier to discern.
This feature is particularly useful for nding sh that feed close to
the bottom.
Bottom Lock is selected for individual shnder windows and
can replace or appear alongside the standard shnder image.
Adjusting the range of the bottom lock image allows you to view
more bottom details. You can also reposition the image on screen to
anywhere between the bottom of the window (0%) and the middle of
the window (50%) by using the Bottom Shift control.
Bottom Lock is selected for individual shnder windows and can
either replace (ON) or appear alongside (SPLIT) the standard
shnder image.
Enabling Bottom Lock
From the shnder main screen:
1. Use the softkeys to select an appropriate preset.
The softkey name changes to ADJUST...
2. Select the ADJUST... softkey.
3. With dual frequency screens select FREQ1 or FREQ2 to select
which frequency display you wish to change.
4. Select the SELECT VIEW softkey.
5. Select the BOTTOM LOCK option.
Adjusting the bottom lock range/position
With the shnder in bottom lock mode:
1. Use the appropriate softkeys and the trackpad to set Full /
Split screen, Bottom lock range and Bottom shift values as
appropriate.
176 E-Series Widescreen User reference