Waypoints in the shnder application
Waypoints in the shnder application are represented by a vertical
line labelled WPT. This symbol cannot be changed.
Waypoint hotspots
Placing the cursor over a waypoint in the chart or radar applications
displays a pop-up showing the waypoint’s basic information.
Selecting a waypoint hotspot also provides the following the softkey
functions:
• Erase waypoint.
• Move waypoint.
• Go to waypoint.
• View / edit waypoint.
Waypoint features
There are a range of features for placing, navigating and managing
waypoints.
Waypoint features are accessed from:
• the chart or radar application — by positioning the cursor over
an existing waypoint on the screen.
• any application — by pressing the WPTS MOB button. This
displays the waypoint toolbar
• the home screen — by pressing the WPTS MOB button or
selecting the My Waypoints icon. This displays the waypoints list.
The following table lists the waypoint functions you can access at
any time, from all applications and the home screen:
Waypoint function All applications Home screen
Placing a waypoint
Displaying waypoint information
(Waypoint list)
Navigate to a waypoint
Edit waypoint information
Edit waypoint appearance / symbol
Using waypoints, routes and tracks
51
To Next Page
Loading...
