Raymarine E-Series - Page 52

Waypoint function All applications Home screen
Move waypoints
Creating and managing waypoint
groups
Displaying and managing waypoint
groups
Move a waypoint between groups
Waypoint placement
Placing a waypoint using touch
In the chart, radar, shnder, or CDI application:
1. Press the WPTS MOB button.
2. Touch the area of the screen where you want the waypoint.
3. (Optionally) select the waypoint Name, Group, or Symbol eld to
customize the waypoint details. Then select SAVE.
Placing a waypoint at the cursor position
In the chart, radar, shnder, or CDI application:
1. Press the WPTS MOB button.
2. Move the cursor to the area of the screen where you want the
waypoint to be placed.
3. Select the WAYPOINT AT CURSOR softkey.
4. (Optionally) select the waypoint Name, Group, or Symbol eld to
customize the waypoint details. Then select SAVE.
Placing a waypoint at your vessel’s position
In addition to positional information, a waypoint placed at the vessel
position will capture temperature and sounded depth information (if
you have the appropriate sensors connected to your system).
In the chart, radar, shnder, or CDI application:
1. Press the WPTS MOB button.
2. Select the WAYPOINT AT VESSEL softkey.
3. (Optionally) select the waypoint Name, Group, or Symbol eld to
customize the waypoint details. Then select SAVE.
Placing a waypoint at a known position
Note: By default the system will use Lat/Lon coordinates. If
required you can use Loran TD coordinates instead. Use the
System Setup Menu to set the position mode appropriately.
1. Press the WPTS MOB button.
2. Select the WAYPOINT AT LAT/LON softkey.
3. Select the EDIT USING KEYPAD softkey.
4. Enter the Latitude/Longitude position.
5. Select SAVE.
6. Close the window.
52 E-Series Widescreen User reference