Showing and hiding waypoint groups / symbols
In the chart, radar, shnder, or CDI application:
1. Press the WPTS/MOB button.
2. Select the REVIEW AND EDIT WAYPOINTS softkey.
3. Select the SHOW/HIDE WAYPOINTS softkey.
4. Using the SHOW BY softkey, select the SHOW BY GROUP or
SHOW BY SYM option, as appropriate.
A list of available waypoint groups or symbols is displayed.
5. Select the waypoint group or symbol that you want to show or
hide.
6. Using the ON CHART softkey, select the SHOW or HIDE option,
as appropriate.
7. Repeat Steps 5 to 6 for each waypoint group or symbol you want
to show or hide.
Moving waypoints
Moving a waypoint on the chart or radar screen
In the chart or radar application:
1. Move the cursor to the relevant waypoint.
The softkeys change to provide waypoint options.
2. Select the MOVE WAYPOINT softkey.
3. Select the new position for the waypoint.
4. Select the PLACE WAYPOINT softkey.
Moving a waypoint within a route
In the chart application:
1. Move the cursor over the waypoint you want to move.
The softkeys change to provide waypoint options.
2. Select the MOVE WAYPOINT softkey.
3. Move the cursor so that it stretches the leg of the route to the
desired position on the chart.
4. Select the PLACE WAYPOINT softkey.
Moving a waypoint by entering new coordinates
With the Waypoint List displayed:
1. Select the VIEW AND EDIT DETAILS softkey.
The Edit Waypoint dialog is displayed.
2. Select the Position, Bearing, or RNG eld, as appropriate.
3. Use the rotary control to enter the new coordinates, or select the
EDIT USING KEYPAD softkey and use the on-screen keyboard.
Erasing waypoints
Erasing a waypoint on screen
In the chart or radar application:
1. Move the cursor to the relevant waypoint.
The softkey toolbar changes to show the waypoint options.
2. Select the ERASE WAYPOINT softkey.
3. Select the YES softkey to conrm, or NO softkey to cancel.
Erasing a waypoint using the waypoint list
With the Waypoint List displayed:
1. Highlight the waypoint you want to erase.
2. Select the ERASE WAYPOINT softkey.
3. Select the YES softkey to conrm.
Note: If a route is hidden, its waypoints can still be displayed. If
you attempt to erase a waypoint from a hidden route, a warning is
displayed, and the waypoint cannot be erased.
Erasing all waypoints
1. Press the DATA button.
2. Select the ARCHIVE AND TRANSFER softkey.
3. Select the ERASE FROM SYSTEM softkey.
4. Use the SELECT LIST softkey to select the WPT option.
5. Select the ERASE ALL WAYPOINTS softkey.
56 E-Series Widescreen User reference
To Next Page
Loading...
