6. Select the YES softkey to conrm, or the NO softkey to cancel.
Note: If a route is hidden, its waypoints can still be displayed. If
you attempt to erase a waypoint from a hidden route, a warning is
displayed, and the waypoint cannot be erased.
Waypoint groups
In order to make your waypoints easier to manage, you can organize
them into groups of your choice. When shing, for example, you
may only wish to see the waypoints that indicate good shing sites.
Provided that you have not changed the default group, all waypoints
are automatically placed in the default “My Waypoints” group when
they are created.
Note: A waypoint can only belong to one group.
Displaying the waypoint group list
1. Press the WPTS MOB button. or select My Waypoints from
the home screen.
2. Select the MANAGE SYMBOLS AND GROUPS softkey.
The Waypoint Group List is displayed.
You can now:
• Make a new waypoint group.
• Move waypoints between groups.
• Rename groups.
• Erase groups.
Making a new waypoint group
With the Waypoint Group List displayed:
1. Select the MAKE NEW GROUP softkey.
2. Select the name eld.
The on-screen keyboard is displayed.
3. Edit the name.
4. Select the on-screen keyboard’s SAVE key.
Moving waypoints between groups
With the Waypoint Group List displayed:
1. Select the appropriate waypoint group from the list.
2. Select the MOVE BETWEEN GROUPS softkey.
3. Select the SELECT GROUP A softkey.
4. Using the rotary control, select the waypoint group that contains
the waypoint you want to move.
5. Press the OK button.
6. Highlight the Group B column.
7. If the Group B column does not contain the waypoint group you
want to move your waypoint to, select the SELECT GROUP B
softkey, and use the rotary control to select the required group.
8. In the Group A column, select the waypoint you want to move.
9. Select the MOVE WAYPOINT FROM A TO B softkey.
The waypoint is moved to the new group.
Renaming a waypoint group
With the Waypoint Group List displayed:
1. Select the group you want to rename.
2. Select the RENAME GROUP softkey.
3. Select the EDIT GROUP NAME softkey.
The on-screen keyboard is displayed.
4. Using the on-screen keyboard, edit the group name.
5. Select the on-screen keyboard’s SAVE key.
Changing the default waypoint group
With the Waypoint Group List displayed:
1. Select the SET DEFAULT SYM & GROUP softkey.
2. Select the EDIT DEFAULT softkey.
3. Select the waypoint group that you want to make the default.
4. Press the OK button.
Using waypoints, routes and tracks
57
To Next Page
Loading...
