Review or edit a route
There are a variety of attributes associated with routes. These can
be reviewed and edited.
You can:
• Show or hide a route on the chart screen.
• Review details of the route
• Add and remove waypoints.
• Move waypoints within a route.
• Reverse a route.
• Change the name or color of a route.
• Erase a route.
• Show or hide a route on the chart screen.
• Adjust the line thickness for routes.
Note: An active route can be edited, with the exception of the
target waypoint. If a waypoint being edited becomes the target,
then the system shall cancel the edit; the waypoint shall remain in
its original position.
Selecting a route to review or edit
1. Do one of the following to select the required route:
• With the chart application active, select a route on screen,
then press the Review & Edit This Route softkey.
• With the chart application active, use the following softkey
sequence; Navigation options > Planning > My Routes and
select the required route from the list.
• From the home screen, select My routes and select the
required route from the list.
Adding a waypoint to a stored route
In the chart application:
1. Select the PLANNING softkey.
2. Select the MY ROUTES softkey.
3. Select the route you want to add a waypoint to.
4. Select the AMEND ROUTE COURSE softkey.
5. Select the USE WAYPOINT LIST softkey.
6. Highlight the right-hand column of the list.
7. Use the trackpad to select the appropriate place for the waypoint.
8. Press the trackpad left to highlight the left-hand column of the list.
9. Highlight the waypoint you want to insert at the start of the route.
10.Select the INSERT WAYPOINT softkey.
11. Press the OK button.
Adding a waypoint to a route on the chart screen
In the chart application:
1. Move the cursor over the appropriate leg of the route.
The softkeys change to provide route functions.
2. Select the INSERT WAYPOINT softkey.
3. Move the cursor so that it stretches the leg of the route to the
desired position on the chart.
4. Select the PLACE WAYPOINT softkey.
Removing a waypoint from a route
In the chart application:
1. Using the trackpad, move the cursor over the waypoint you want
to remove.
2. Press the REMOVE WAYPOINT softkey.
Moving a waypoint within a route
In the chart application:
1. Move the cursor over the waypoint you want to move.
The softkeys change to provide waypoint options.
2. Select the MOVE WAYPOINT softkey.
Using waypoints, routes and tracks
65
To Next Page
Loading...
