Raymarine E-Series - Page 95

Menu item Description Options
3D set up
Settings specic to the 3D chart view:
• Center-of-view indicator — determines whether a white cross is
displayed, indicating the centre of view.
• Trans Cone — displays a transducer cone below the vessel icon,
indicating the approximate scope of the shnder coverage.
• Depth Scale — displays a scale below the vessel icon, indicating
the approximate depth of the water underneath your vessel.
• Center-of-view indicator:
– ON
– OFF (default)
• Trans Cone:
– ON
– OFF (default)
• Depth Scale:
– ON
– OFF (default)
2D set up
Settings specic to the 2D chart view:
• Heading Vector — displays a red vector line from your vessel icon,
indicating your current heading. The length of the line depends on
the value you specify for the Vector Length setting.
• COG Vector — displays a green vector line from your vessel icon,
indicating your current Course Over Ground (COG) bearing. The
length of the line depends on the value you specify for the Vector
Length setting.
• Tide Arrow — displays a blue animated arrow indicating the
direction of tides. The width of the arrow indicates the tide strength.
• Wind Arrow — displays a yellow animated arrow indicating the
wind direction. The width of the arrow indicates the wind strength.
• Vector Length — the distance your vessel travels in the time period
specied for this option, determines the length of the vector lines
drawn on the chart display. This affects COG and HDG (heading)
vectors. If the Innite option is selected, the vector will extend to
the edge of the chart window.
• Heading Vector:
– ON
– OFF (default)
• COG Vector:
– ON
– OFF (default)
• Tide Arrow:
– ON
– OFF (default)
• Wind Arrow:
– ON
– OFF (default)
• Vector Length:
Using the chart
95