Raymarine E90W - Using man Overboard (MOB) Functions

8.1UsingManOverboard(MOB)
functions
Manoverboard
Ifyouloseapersonorobjectoverboard,youcanusetheMan
Overboard(MOB)functiontomarktheposition.
TheMOBfunctionisavailableatalltimes,regardlessofwhich
applicationisrunning.
WhenMOBisactivated,analertmessageappearson-screen,and
anemergencywaypointiscreated.Abearingtothewaypointis
alsoprovided.Thealertandemergencywaypointalsoappearon
anynetworkeddisplaysatthesametime.
Activatingthemanoverboardfunction
1.PressandholdtheWPTS/MOBbuttonfor3seconds.
Thenormalchartapplicationisresettothesamesettingsthat
ithadbeforetheMOBalarmwasraised.
Note:ToobtainaMOBposition,yourmultifunctiondisplaymust
haveaGPSpositionx.
CancellingaMOBalarm
1.PressandholdtheWPTS/MOBbuttonforfourseconds.
OncetheMOBalarmiscleared:
•thechartapplicationmotionmodeisreset.
•thedatabarmodeisreset.
•GOTOandroutefunctionsarerestored.
MOBchartapplication
IfaMOBisraisedwhilethechartapplicationorthehomescreen
isdisplayed,aspecialMOBchartapplicationisstartedtohelpyou
locatethesourceofthedistresssignal.
ThespecialMOBchartapplicationisdisplayedonyourmultifunction
displayandanyothernetworkedmultifunctiondisplay(s).The
specialMOBchartapplicationhasthefollowingfeaturesand
settings:
•AMOBsymbolisplacedatthepositionofthevesselwhenthe
MOBbuttonwaspressed.
•ThechartissettoAutoRangeMotionMode,andthechartscale
issettothelowestsettingthatmaintainsthevesselandMOB
waypointon-screenatthesametime.
•IfthevesselmovesawayfromtheMOBposition,thesystem
drawsadottedlinejoiningtheMOBpositionwiththevessel
position.
•GOTOandRoutefunctionsaredisabled.
•Chartdetailissettolow.
108E-SeriesWidescreenUserreference