Raymarine E90W - Using the Cursor

1
2
3
1.RotaryControl.Usethistoselectmenuoptionsandadjustthe
valueofvariousitems.
2.Trackpad.Usethistoselectmenuitems,optionsandmove
thecursor.
3.OKbutton.Usethistoconrmaselectionorentry.
Usingbuttonsandsoftkeys
Youcancontrolyourmultifunctiondisplayusingthevariousbuttons
andsoftkeysontheunit.
ACTIVE DATA
Buttonsareusedtoaccesssystemfunctionsor
changewhatyouseeon-screen.
Softkeysareusedtoselectfrequently-used
options.Therangeofsoftkeysavailableatany
onetimedependsonthecontext—forexample,
theapplicationorfunctioninuse.Touchinga
softkeylabelon-screenselectsthesoftkey.You
canalsopressthecorrespondingphysicalkey
ontheunit.
Note:Todisabletheaudible"beep"thatyouhearwhenabutton
orsoftkeyispressed,gotoMenu>DisplaySetup>KeyBeep.
Touchicons
YoucanusetheBACKandCLOSEiconstomovebetweenthe
differentlevelsofsoftkeysavailableineachapplication.
Back—gobackonelevel(sameeffectasCANCEL
button).
Close—returntothetoplevelofsoftkeys(thatis,the
initialrangeofsoftkeysshownwhenanapplicationis
rststarted).
Usingthecursor
Thecursorisusedtomovearoundthescreen:
D7366_3
Thecursorappearsonthescreenasawhitecross.
D7368_2
Ifthecursorhasnotbeenmovedforashortperiodoftime,
itchangestoacirclewithacrossinit,tomakeiteasierto
locateonthescreen.
D7369-2
WPT
Thecursoriscontext-sensitive.Whenitisplacedoveran
objectsuchasawaypointorchartfeature,itchangescolor
andalabelorinformationassociatedwiththeobjectis
displayed.Whenyouplacethecursorovercertainitems,the
softkeyschangetoproviderelatedoptions.
22
E-SeriesWidescreenUserreference