Raymarine E90W - Changing What the Engine Application Displays

13.6Changingwhattheengine
applicationdisplays
Intheengineapplication:
1.PresstheMENUbutton.
2.SelectPanelSetupMenu.
3.SelecttheappropriateCongure:menuitem.
Aredoutlineappearsaroundthemaindataelementinthe
enginemonitoringapplication.
4.Highlightthedataelementthatyouwanttochange.
5.SelecttheSELECTDATAsoftkey.
6.Selecttheappropriatedatagroup.
7.Selecttheappropriatecategory,thenselecttheappropriate
option.
Theenginedisplaywillbeupdatedtoshowthedatathatyou
specied.
Note:Y oucanalsoaccesstheSELECTDATAsoftkeyby
pressingandholdingthephysicalsoftkeyassociatedwiththe
datapanelyouwanttocustomize(forexample,NAVIGATION).
Renamingdatapanels
Inthedataorengineapplication:
1.PresstheMENUbutton.
2.SelectPanelSetupMenu.
3.Selectthepanelyouwanttorename(Congure...).
4.SelecttheRENAMEPANELsoftkey.
Theon-screenkeyboardisdisplayed.
5.Enterthenewnameforthedatapanel.
6.Selecttheon-screenkeyboard’sSAVEkey.
Changingthesizeofdatapanels
Inthedataorengineapplication:
1.PresstheMENUbutton.
2.SelectPanelSetupMenu.
3.Selectthedatapanelyouwanttoresize(Congure...).
4.SelecttheMERGECELLSsoftkeyifyouwanttomergethe
contentsofthecellwithanadjacentcell,resultinginabiggercell.
5.SelecttheSPLITCELLsoftkeyifyouwanttosplitthesizeof
thecellinhalf.
192E-SeriesWidescreenUserreference