Raymarine E90W - Page 92

MenuitemDescriptionOptions
3Dsetup
Settingsspecictothe3Dchartview:
•Center-of-viewindicator—determineswhetherawhitecrossis
displayed,indicatingthecentreofview.
•TransCone—displaysatransducerconebelowthevesselicon,
indicatingtheapproximatescopeoftheshndercoverage.
•DepthScale—displaysascalebelowthevesselicon,indicating
theapproximatedepthofthewaterunderneathyourvessel.
•Center-of-viewindicator:
–ON
–OFF(default)
•TransCone:
–ON
–OFF(default)
•DepthScale:
–ON
–OFF(default)
2Dsetup
Settingsspecictothe2Dchartview:
•HeadingVector—displaysaredvectorlinefromyourvesselicon,
indicatingyourcurrentheading.Thelengthofthelinedependson
thevalueyouspecifyfortheVectorLengthsetting.
•COGVector—displaysagreenvectorlinefromyourvesselicon,
indicatingyourcurrentCourseOverGround(COG)bearing.The
lengthofthelinedependsonthevalueyouspecifyfortheVector
Lengthsetting.
•TideArrow—displaysablueanimatedarrowindicatingthe
directionoftides.Thewidthofthearrowindicatesthetidestrength.
•WindArrow—displaysayellowanimatedarrowindicatingthe
winddirection.Thewidthofthearrowindicatesthewindstrength.
•VectorLength—thedistanceyourvesseltravelsinthetimeperiod
speciedforthisoption,determinesthelengthofthevectorlines
drawnonthechartdisplay.ThisaffectsCOGandHDG(heading)
vectors.IftheInniteoptionisselected,thevectorwillextendtothe
edgeofthechartwindow.
•HeadingVector:
–ON
–OFF(default)
•COGVector:
–ON
–OFF(default)
•TideArrow:
–ON
–OFF(default)
•WindArrow:
–ON
–OFF(default)
•VectorLength:
92E-SeriesWidescreenUserreference