MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
8540780 • 30/03/2016 • Rev.26 31
GENERAL SYSTEM CHARACTERISTICS
See the technical data tables for each module
EN ISO 13849-1:2008
EN 62061:2005
24VDC 20% / Supply from class II (LVLE)
PNP active high (EN 61131-2) – Max. applicable resistance 1,2kΩ
PNP active high - 400mA@24VDC max (each OSSD)
PNP active high - 100mA@24VDC max
This response times depends on the following
parameters:
1) Number of Slave modules installed
2) Number of Operators
3) Number of OSSD outputs
For the right response time refer to the one
calculated by the DSD software (see Project report)
This parameter corresponds to the response time,
with the exception of MV modules with
Encoder/Proximity interface where is 2s
ReeR proprietary 5-pole bus (MSC)
0,5 ÷ 2,5 mm
2
/ AWG 12÷30 (solid/stranded)