REGLOPLAS RT100 - Max. Heat.;Cool. Time; Minimum Flow Rate; Flow Deviation (Software Option)

V 01/2016
24  Parameterisation RT100 Control System
Max. heat./cool. time
Parameter Remarks
Max. heating time Input ON/OFF
Deviation Input in °C
Time Input in minutes
Max. cooling time Input ON/OFF
Deviation Input in °C
Time Input in minutes
Minimum flow rate
Parameter Remarks
Minimum flow rate Input - monitoring of the minimum flow rate (Active/Inactive)
Minimum flow rate Setting the minimum flow rate (l/min or GPM)
Active from temperature Minimum flow rate active from adjustable temperature (in °C/°F)
Flow deviation (Software option)
Parameter Remarks
Flow deviation Input - deviation of the minimum flow rate (Active/Inactive)
Low pass actual value Actual value setting - low pass (in seconds)
Low pass offset refer-
ence
Offset setting - low pass (in seconds)
Deviation Deviation setting (-100-0%)
Alarm suppression Setting of duration of the alarm suppression (in sec.)
Flow monitoring