V 01/2016
RT100 Control System Parameterisation 37
Save/Load
Parameter Remarks
Load user setting 1 Loading the user settings 1
Save user setting 1 Saving the user settings 1
Load AIC factory settings Loading the user settings AIC
Save AIC factory settings Saving the user settings AIC
Loading the factory settings Loading the factory settings
Save the factory settings Saving the factory settings (Regloplas password required)
Load settings from USB stick Loading the settings from the USB stick
Save settings to USB stick Saving the settings to the USB stick
Load characteristic curve F1000
Loading the characteristic curve F1000 (pump characteristic) from the
USB stick
Code
The password parameters are displayed in this menu:
Parameter Range Remarks
User password
New password Input new password
Repeat Repetition of password input
Set Activation of the password
Technician password
New password Input new password
Repeat Repetition of password input
Set Activation of the password
Service password
New password Input new password
Repeat Repetition of password input
Set Activation of the password
Reset passwords
Reset code (if the password has
been forgotten, a corresponding
reset code is required)
Input of the reset code (four-digit)
Reset Resetting to default passwords (ex-factory)
To Next Page
Loading...