Reliable Controls SMART-Space Controller User Manual

83
 2012-2015 Reliable Controls Corporation
DISPLAY CONFIGURATION
USER GUIDE
OPERATOR INTERFACE
SMART-SPACE CONTROLLER
™
Analog 0 Decimal, 1 Decimal, 2 Decimal, time
Display Unit/
Icon
For objects with an Analog Type, the Display Unit/Icon field allows
for the selection units to be displayed if the point is viewed on the
LCD screen.
Analog Degrees Celsius
Degrees Fahrenheit
Percent
ppm Parts per Million
None
For objects with a State type, the Display Unit/Icon field allows for
the selection of the icon ranges available for the display of objects
with State selected in the Type column. These icon ranges are
displayed at the bottom of the default LCD screen, and also when
the point is displayed individually by scrolling to it.
State Heat
Cool
Cool/Heat
Manual
Off/Auto/Manual
Fan Speed
Occupancy
Fan
None
User Edit Toggles between Display Only, indicating that the value cannot be
adjusted by an operator; and Can Change, indicating the value
can be modified by means of the SMART-Space Controller and
buttons.
BACnet objects shared from the BACnet network to a SMART-Space Controller can be
displayed on the LCD screen; however, user adjustment is not possible.
TABLE 13: COLUMNS OF THE DISPLAY CONFIGURATION WORKSHEET
Column Description

Reliable Controls SMART-Space Controller Specifications

General

Brand	Reliable Controls
Model	SMART-Space Controller
Category	Controller
Language	English