53
2012-2015 Reliable Controls Corporation
SLAVE PROXY CONFIGURATION
USER GUIDE
SOFTWARE CONFIGURATION
SMART-SPACE CONTROLLER
™
SLAVE PROXY CONFIGURATION
For a SMART-Space Controller to be accessed by other BACnet devices on a BACnet
network, including RC-Studio workstations, a proxy device must be present on the same
physical network as the SMART-Space Controller. Possible proxy devices are the MACH-
ProCom, MACH-ProSys, MACH-Pro2, and MACH-Pro1 controllers (firmware version 7.20,
or later), and the X-Port-2 converter (firmware version 6.70, or later), all of which have the
slave proxy service enabled by default.
To review and modify the slave proxy setup of a device, select the device in the RC-Studio
BACnet System Tree, and then select BACnet Advanced > Manage Slave Proxy from the
right-click menu.
11 If the firmware sent to one or more controllers fails, as indicated in the OS Send
Status column in the Results frame, the operation can be repeated, using the
Send To button, and filling in the MAC# of the target SSC.
FIGURE 50: RC-TOOLKIT, BACNET OS SEND DIALOG BOX
To Next Page
Loading...
