Renault F4R - Page 100

10A-94
ENGINE AND CYLINDER BLOCK ASSEMBLY
Multifunction support: Removal - Refitting
F4R
10A
-the intercooler air inlet pipe (see 12B, Turbochar-
ging, Intercooler air inlet pipe: Removal - Refit-
ting, page 12B-41) ,
a Fit the front end panel.
a Refit:
-the lower bolts from the front end panel,
-the front end panel clips,
-the front end panel upper bolts,
-the bolts for the wiring channel to the engine coo-
ling fan assembly.
a Refit:
-the bonnet catch (see Bonnet latch: Removal -
Refitting) (52A, Non-side opening element mecha-
nisms).
-the front impact cross member (see Front impact
cross member: Removal - Refitting) (41A, Front
lower structure),
-the audible warning (see Horn: Removal - Refit-
ting) (82B, Horn),
-the front bumper supports (see Front bumper
support: Removal - Refitting) (42A, Front upper
structure),
-the headlights (see Front headlight: Removal -
Refitting) (80B, Headlights),
-the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-7) ,
-the upper air deflector,
-the side air deflectors,
-the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
-the front section of the front wheel arch liners (see
Front wheel arch liner: Removal - Refitting)
(55A, Exterior protection),
-the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
-the engine undertray,
-the engine cover.
a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).
a Perform the following operations:
-fill the refrigerant circuit using a refrigerant char-
ging station. (see Coolant circuit Draining - Re-
filling) (62A, Air conditioning),
-a leak test (see Coolant circuit check) (62A, Air
conditioning).
a Check that the air conditioning is working correctly
(see Air conditioning: Check) (62A, Air conditio-
ning).