Renault F4R - Page 167

10A-161
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
K9K
10A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Lock the flywheel using tool (Mot. 582) (1) .
a Remove:
-the flywheel bolts (2) ,
-the flywheel,
-the (Mot. 582).
a Lock the flywheel using tool (Mot. 582) (1) .
a Remove:
- the flywheel bolts (2) ,
- the flywheel,
- the (Mot. 582).
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the flywheel bolts,
- the differential output seals.
a Clean the flywheel threads using SURFACE CLEA-
NER (see Vehicle: Parts and ingredients for the
repairwork) (04B, Consumables - Products).
a Degrease the flywheel bearing faces using SURFA-
CE CLEANER (see Vehicle: Parts and ingre-
dients for the repairwork) (04B, Consumables -
Products).
TL4
134218
JR5
135857