11A-96
TOP AND FRONT OF ENGINE
Rocker cover: Removal - Refitting
K9K
11A
a Refit the camshaft position sensor (see 13B, Diesel
injection, Camshaft position sensor: Removal -
Refitting, page 13B-19) .
a Tighten to torque:
-the lower engine tie-bar bolt on the subframe
(180 N.m),
-the lower engine tie-bar bolt on the lower engi-
ne tie-bar support (180 N.m).
a Refit:
-the engine undertray,
-the engine cover.
K9K, and 830
To Next Page
Loading...
