Renault F4R - Page 306

11A-132
TOP AND FRONT OF ENGINE
Camshaft: Removal - Refitting
F9Q
11A
a Remove:
-the inner timing cover bolts (3) ,
-the inner timing cover,
-the rocker cover (see 11A, Top and front of engi-
ne, Rocker cover: Removal - Refitting, page
11A-88) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
-the bolts of the camshaft bearing cap cover,
- the camshaft bearing cap cover,
a Remove:
- the camshaft (4) ,
- the camshaft seal on the timing end.
REFITTING
I - REFITTING PREPARATION OPERATION
a
a Use SUPER CLEANING AGENT FOR JOINT FA-
CES (see Vehicle: Parts and ingredients for the
repairwork) (04B, Consumables - Products) to
clean:
- the joint face of the camshaft bearing cap cover,
- the cylinder head joint face.
a Use SURFACE CLEANER (see Vehicle: Parts
and ingredients for the repairwork) (04B, Consu-
mables - Products) to degrease:
- the joint face of the camshaft bearing cap cover,
136226
136227
136229
WARNING
Do not scrape the joint faces of the aluminium,
any damage caused to the joint face will result in
a risk of leaks.
WARNING
To ensure proper sealing, the gasket surfaces
must be clean, dry and not greasy (avoid any fin-
ger marks).