11A-137
TOP AND FRONT OF ENGINE
Cylinder head: Removal - Refitting
K9K
11A
a Disconnect the oil vapour rebreathing pipe union
from the air filter unit air outlet pipe at (1) .
a Separate the oil vapour rebreathing pipe clip (2)
from the oil vapour rebreathing valve.
a Disconnect the oil vapour rebreathing pipe from the
oil vapour rebreathing valve.
a Remove the nut (3) from the gearbox breather pipe
support.
a Separate the gearbox breather pipe support.
a Remove:
- the bracket bolts (4) of the oil vapour rebreathing
K9K, and 830
135880
135879
135845
112325
To Next Page
Loading...
