11A-209
TOP AND FRONT OF ENGINE
Oil decanter: Removal - Refitting
F9Q
11A
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the oil separator.
a Fit the oil separator clip on the cylinder block using
the tool (Mot. 1448).
a Refit the oil separator bolts.
a Torque tighten the oil separator bolts (30 N.m).
a Connect:
-the oil return pipes,
-the oil vapour rebreathing pipe.
a Refit the dipstick.
II - FINAL OPERATION
a Refit:
-the engine undertray,
-the engine cover.
To Next Page
Loading...
