12A-44
FUEL MIXTURE
Exhaust manifold: Removal - Refitting
K9K, and 830 or 832
12A
a Refit the lower engine tie-bar (see 19D, Engine
mounting, Lower engine tie-bar: Removal - Refit-
ting, page 19D-33) .
a Refit:
-the engine undertray,
-the engine cover.
a Refit:
-the centre section of the scoop under the scuttle
panel grille (see Scoop under scuttle panel
grille: Removal - Refitting) ,
-the centre section of the scuttle panel grille (see
Scuttle panel grille: Removal - Refitting) .
a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).
K9K, and 830
J95