Renault F4R - Page 556

13B-44
DIESEL INJECTION
High pressure pump: Removal - Refitting
K9K, and 834
13B
a Disconnect the fuel supply pipe union (4) from the
high pressure pump.
a Fit a suitable blanking plug on:
-the high pressure pump opening,
-the fuel supply pipe opening.
a Disconnect:
-the flow actuator connector (5) ,
-the fuel temperature sensor connector (6) .
a Unclip the alternator wiring from the injector rail pro-
tector.
a Remove the alternator upper bolt (7) .
a Loosen the alternator lower bolt (8) .
a Tilt the alternator forward.
a Remove:
- the inner timing cover bolts (9) ,
- the inner timing cover.
136618 136742
136739