13B-57
DIESEL INJECTION
Fuel flow actuator: Removal - Refitting
K9K, and 834
13B
a Remove:
-the flow actuator bolts (3) ,
-the flow actuator from the high pressure pump (by
hand with small tugs and successive turns).
REFITTING
I - REFITTING PREPARATION OPERATION
a
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
-the flow actuator on the high pressure pump,
-the flow actuator bolts.
III - FINAL OPERATION
a Refit the engine cover.
a Connect the battery (see Battery : Removal - Refit-
ting) (80A, Battery).
137860
Note:
Do not lubricate the seals with grease or old die-
sel fuel. Use the applicator provided in the kit for
the new part.
To Next Page
Loading...
