17B-12
PETROL INJECTION
Pinking sensor: Removal - Refitting
F4R
17B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
-the engine undertray bolts,
-the engine undertray.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the pinking sensor connector (1) .
a Remove:
-the pinking sensor nut (2) ,
-the pinking sensor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the pinking sensor.
a Torque tighten the pinking sensor nut (18 N.m).
a Connect the pinking sensor connector.
II - FINAL OPERATION
a Refit the engine undertray.
Tightening torquesm
pinking sensor nut 18 N.m
135701
To Next Page
Loading...
