19C-19
TANK
Fuel level sensor module: Removal - Refitting
19C
a Tighten the fuel level sensor module nut using the
tool (Mot. 1397) until the nut mark (10) corresponds
with the fuel tank mark (11) .
a Connect:
-the fuel pipe unions on the fuel level sensor modu-
le,
-the fuel level sensor module connector.
a Connect:
-the fuel pipe union on the fuel level sensor module,
-the fuel level sensor module connectors.
a Clip on the fuel level sensor module connector.
III - FINAL OPERATION
a Refit:
-the plastic blanking cover of the passenger com-
partment,
-the subframe panel of the fuel level sensor module.
a Refit the rear bench seat.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
137740
F9Q or K9K
F4R or K4M