19C-18
TANK
Fuel level sensor module: Removal - Refitting
19C
a Remove the fuel level sensor module nut (7) using
the tool (Mot. 1397).
a Let the fuel drain from the fuel level sensor module.
a Remove:
-the fuel level sensor module, taking care not to da-
mage the float,
-the fuel level sensor module seal.
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: Fuel level sensor
module nut (11,08,02,05).
a parts always to be replaced: Fuel level sensor
module seal (11,08,02,06).
II - REFITTING OPERATION FOR PART
CONCERNED
a Position:
- the new seal (8) in the neck correctly,
-the fuel level sensor module (9) on the fuel tank. A
lug on the fuel level sensor module and a recess in
the fuel tank ensure correct positioning in the fuel
tank.
a Use a hand to press the fuel level sensor module to
grip the seal.
a Refit a new nut on the fuel tank.
138143
WARNING
To prevent the tank from deforming, refit the fuel
sender unit nut to the tank well immediately.
118996