Renault F4R - Page 986

19D-31
ENGINE MOUNTING
Right-hand suspended engine mounting: Removal - Refitting
F9Q
19D
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Unclip the fuel pipes (3) .
a Remove:
-the upper engine tie-bar bolts (4) ,
-the upper engine tie-bar.
a Mark the position of the right-hand suspended engi-
ne mounting on the body using a indelible pencil.
a Remove:
- the right-hand suspended engine mounting bolts
(5) on the body,
- the bolts (6) from the right-hand suspended engine
mounting on the engine,
- the right-hand suspended engine mounting.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the right-hand suspended engine mounting in
relation to the mark made at the time of removal.
a Torque tighten the right-hand suspended engine
mounting bolts (62 N.m).
a Refit the upper engine tie-bar.
a Tighten to torque:
- the engine tie-bar bolt on the body (110 N.m),
- the engine tie-bar bolt on the engine (115 N.m).
a Clip on the fuel pipes.
II - FINAL OPERATION
a Remove the (Mot. 1453) and (Mot. 1453-01).
a Refit:
- the front left-hand bonnet stop,
133990
137752
136181