PG-FP5 CHAPTER 8 USAGE COMMUNICATION COMMANDS
R20UT0008EJ0400 Rev. 4.00 Page 164 of 240
Jul 15, 2010
8.4.21 upprm command
Uploads the PR5 file.
Input format
'upprm'
Description of the function
If the PR5 file has been downloaded to a valid programming area, then executing this command will upload the PR5 file.
Example of usage
Command Screen output
upprm Press 'return' to start/continue output.
After the command is executed, pressing the Return key will start the upload. See below.
[FlashProParameterFile]
:
[CHECKSUM]
SUM=BA9F0491
[EOF]
To Next Page
Loading...
Need help?
General
